Product Details
- Color: None
- Brand: Fotodiox
- Model: 10-MCR-CN-Kit
- Dimensions: 1.00" h x
1.00" w x
1.00" l,
1.00 pounds
Features
- Kit includes: Camera Mount Coupling Adapter, Lens Mount Coupling Adapter, Extension Tube 1, Tube 2, Tube 3
- All Metal Construction Any combination for various Macro Effect
- 24 Month Manufacture Warranty
- Kit includes: Camera Mount Coupling Adapter, Lens Mount Coupling Adapter, Extension Tube 1, Tube 2, Tube 3
- All Metal Construction Any combination for various Macro Effect
- 24 Month Manufacture Warranty
Product Description
Kit includes: Camera Mount Coupling Adapter, Lens Mount Coupling Adapter, Extension Tube 1, Tube 2, Tube 3 All Metal Construction Any combination for various Macro Effect. 24 Month Manufacture Warranty
Customer Reviews
Most helpful customer reviews
369 of 372 people found the following review helpful.
By elogical
At this price, why not give macro a try? Do a little research first since it's not exactly and plug and play accessory for the camera, but they really aren't tough to use and can get exactly the same result as the name brand tubes costing 10 to 20 times more. The main thing to keep in mind is that you lose autofocus as and you lose aperture control, otherwise it's just adding air space so there's not really much difference when you step up in cost. If you need to set you aperture, use the DOF trick. Just set your aperture and then press the DOF preview button. Then keep holding it down while you release the lens and it stays set. As far as focus, manual isn't as bad as you'd think for non-moving subjects.As far as the product itself, it's pretty nice for the price. Doesn't have the finely machined feel of an expensive lens or filter, but it's not cheap junk either. The threads all turn smoothly with no resistance, and the lens and camera mounts fit tightly.And as a final note, don't even think about trying to use this without off camera lighting. Even in daylight, the pics will likely turn out underexposed when focused in this closely unless you have some extra lighting to hold up to the subject. The on camera flash is useless when you're focused on something half an inch away from your lens as well.
173 of 175 people found the following review helpful.
By omega
I started to use my Canon Rebel T2i (550D) with the 18-135mm f/3.5-5.6 IS macro lens to take some close up shots, they were OK.But after using this product am completely sold unto macro photography. with the three rings attached I was able to get much closer than the lens could on its ownand I was pretty amazed at the details... WOW.Attaching the tube to the camera and lens was easy and surprisingly quick. However, ever removing it from the camera body was a challenge until I figured out that you have to push up the little pin while unscrewing the thing. I wish there was some sort of written instructions with it in the box. But once you figure that out its a breeze and an absolute pleasure using. One thing though you must use some external flash source for illumination, an external flash provided all the light I needed and the results were fantastic.If you are new to this type of photography this is definitely worth the price, plus its made from aluminum so its gonna last a while.
90 of 92 people found the following review helpful.
By PCMentor
This all metal aluminum extension set works fine, see photo above of quarter . I was worried it might touch the body or lens electrical contacts, it doesn't. It has both red dots to align with, not white, EF-S lenses. The locking pin works on my EF-S kit 18-55 lens, but I had to align where I thought the white dot is. I took them all apart and put together. The smallest one was stuck to the ring. I warmed it up on an incandescent light bulb for 45 seconds and it came unstuck. All go together smoothly. I had planned to use manual focus anyway whether I bought to $80 or $170 version or not.I used P setting to take the quarter pic on my Canon Rebel T2i or 550D. I used a simple desklamp 60watt Compact Flourescent for illumination. Also I used live view and view finder as well. If I had to guess I would say the black finish is anodized not paint. The lens side ring is attached by 3 small phillips screws and the lens latch is spring loaded and works ok and is good quality. There is also a small screw that looks like a stop for the camera side attachment.I may post some more interesting pics as I use it. The best feature of this product is a price I did not have to budget for. Thanks
This Page is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED "AS IS" AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Post a Comment